Description
The Injector Centering Tool perfectly aligns select Delta Kits injectors over the impact point of rock chips in automotive windshields.
Especially useful when the glass damage location makes it impossible to align the injector by sighting down the injector cylinder.
Please call Delta Kits customer service for fitment verification.
The Delta Kits Centering Tool is a unique tool used for centering the Injector directly over the impact point. This tool works well when it is difficult to see down the cylinder of the injector. Ensures proper placement of the end seal over the glass break or rock chip. The exclusive design allows for use with Delta Kits Stainless Steel and Aluminum Injectors and B150, B250 or B300 Bridge.
- With the bridge securely mounted to the glass, simply insert the centering tool into the cylinder push it through the end seal until it touches the glass.
- While keeping pressure on the centering tool to hold it against the glass, loosen the bridge center knob slightly and rotate the bridge until you feel the tip of the centering tool dip into the impact point.
- Continue holding pressure on the centering tool while tightening the center knob, screwing the injector cylinder down until it makes contact with the glass and adjusting the bridge with the rear leveling screw(s).
- Remove the centering tool, add windshield repair resin and proceed as usual.
Shannon M. –
It lines up the Bridge perfectly for a perfect repair. I wouldn’t buy any other product.
Dennis Craven –
This takes the guesswork with placement and is especially useful when working within the Frit (black) areas of the glass. Just another useful tool to have when you need it.
Dennis Craven / The Crack Cat / Wichita KS