$206.00
In Stock
At the heart of every great windshield repair system there is a great injector. The exclusive spring-loaded Delta Kits I-100 Injector is preferred by auto glass repair and replacement professionals worldwide. You won’t find a finer injector at any price!
At the heart of every great windshield repair system there is a great injector. The exclusive spring-loaded Delta Kits I-100 Spring-Type Stainless-Steel Injector is preferred by auto glass repair and replacement professionals worldwide. You won’t find a finer Spring-Type Stainless Steel Injector at any price!
Replacement Parts:
12010 I-100 Injector Plunger, Spring Type
12040 I-100 Injector Body, Spring Type
From the Archives
Failure to properly clean the injector can make it inoperable. If your injector becomes cured, which bonds the parts together making it stuck, please contact Delta Kits.
Typically, during the summer, we get a number of calls from technicians who have cured their injectors. The cleaning process is simple, but must be performed properly and consistently.
First, separate the piston from the cylinder immediately after use, and lock the piston in the vacuum position. A fully functioning I-100 injector should slide back and forth smoothly and evenly with ease.
Then, rinse both parts thoroughly with denatured alcohol.
Now, remove the parts from the denatured alcohol and set the piston back into the pressure position. Rinse the parts thoroughly once again.
Blow dry or wipe dry with a paper towel. If you use canned air, make sure it’s a type that doesn’t have a lubricant in it.
Store the piston and cylinder separately in your Delta Kits toolbox with the piston in the pressure position. Be sure to keep the lid closed to reduce UV exposure. Failure to properly clean your injector voids the warranty, so please take the extra two minutes to thoroughly clean your injector after each windshield repair. With proper maintenance, your Delta Kits injector will last a lifetime.
Most importantly, an injector can cure when resin residue is left inside and then exposed to UV light, which hardens the resin. This essentially bonds the injector together, not allowing it to slide back and forth.
Above all, it is no longer fully functional as it cannot be pulled up into a vacuum cycle. As a matter of fact, it is no longer able to do a proper repair.
An example of an injector that’s been fully cured and cannot move at all…. Continue Reading
Only logged in customers who have purchased this product may leave a review.
This windshield repair training is a hands-on, intensive, one day course designed to take your repair quality to the next level. Whether you are just starting out or are a seasoned pro, this class is right for you!
Our team of experienced technicians are dedicated to offering the highest standard of training in the windshield repair industry. During the Delta Kits Training and Certification course, technicians are trained to follow ROLAGS (Repair of Laminated Auto Glass Standards), the industries best practices. Delta Kits Training and Certification covers all technical aspects of windshield repair and will take you from never having completed a repair, to being among the best technicians in the industry. The marketing and insurance billing discussion is designed to help you become more successful in your windshield repair business.
Brent Deines was originally trained by a Novus Methodman in 1987 and is NWRA certified. He has extensive experience repairing windshields and restoring headlights in a variety of climates and conditions. Deines has owned several auto glass repair and replacement businesses in Montana and Oregon and is currently the President and CEO of Delta Kits where he helped develop the company’s headlight restoration program and started the company’s windshield repair training and certification program in 1995.
Korey Gobin, Delta Kits sales manager, is NWRA certified and has been training individuals as well as large groups in the art of professional windshield repair and headlight restoration since 2008. Gobin is actively involved in the Repair of Laminated Automotive Glass Standard and in 2011 was awarded the Mobile Tech Windshield Repair Person of the Year. Korey serves on the ROLAGS committee and has traveled extensively throughout the USA, Canada, and Mexico to promote high-quality standards for windshield repair and headlight restoration. He is affectionately known by his customers as the “Go to Guy” for windshield repair.
Graham Watson, is one of the original Novus Technicians in the UK since 1988 and since then has been running a very successful windscreen repair service in the UK. In 2008 Graham was named Windshield Repair Person of the year at the Mobile Tech Expo, an award he is very proud of as it is voted for by his peers in the trade. For the past 10 years, Watson has been active training technicians for the repair industry and specializes in advanced training for techs with previous experience, during this time he has been lucky enough to work with people from many different countries. His passion for helping others carry out the best quality repairs possible shows in the time he spends offering advice on different trade forums as Screenman.
At the heart of every great windshield repair system there is a great injector. The exclusive spring-loaded Delta Kits I-100 Spring-Type Stainless-Steel Injector is preferred by auto glass repair and replacement professionals worldwide. You won’t find a finer Spring-Type Stainless Steel Injector at any price!
Replacement Parts:
12010 I-100 Injector Plunger, Spring Type
12040 I-100 Injector Body, Spring Type
From the Archives
Failure to properly clean the injector can make it inoperable. If your injector becomes cured, which bonds the parts together making it stuck, please contact Delta Kits.
Typically, during the summer, we get a number of calls from technicians who have cured their injectors. The cleaning process is simple, but must be performed properly and consistently.
First, separate the piston from the cylinder immediately after use, and lock the piston in the vacuum position. A fully functioning I-100 injector should slide back and forth smoothly and evenly with ease.
Then, rinse both parts thoroughly with denatured alcohol.
Now, remove the parts from the denatured alcohol and set the piston back into the pressure position. Rinse the parts thoroughly once again.
Blow dry or wipe dry with a paper towel. If you use canned air, make sure it’s a type that doesn’t have a lubricant in it.
Store the piston and cylinder separately in your Delta Kits toolbox with the piston in the pressure position. Be sure to keep the lid closed to reduce UV exposure. Failure to properly clean your injector voids the warranty, so please take the extra two minutes to thoroughly clean your injector after each windshield repair. With proper maintenance, your Delta Kits injector will last a lifetime.
Most importantly, an injector can cure when resin residue is left inside and then exposed to UV light, which hardens the resin. This essentially bonds the injector together, not allowing it to slide back and forth.
Above all, it is no longer fully functional as it cannot be pulled up into a vacuum cycle. As a matter of fact, it is no longer able to do a proper repair.
An example of an injector that’s been fully cured and cannot move at all…. Continue Reading
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
This windshield repair training is a hands-on, intensive, one day course designed to take your repair quality to the next level. Whether you are just starting out or are a seasoned pro, this class is right for you!
Our team of experienced technicians are dedicated to offering the highest standard of training in the windshield repair industry. During the Delta Kits Training and Certification course, technicians are trained to follow ROLAGS (Repair of Laminated Auto Glass Standards), the industries best practices. Delta Kits Training and Certification covers all technical aspects of windshield repair and will take you from never having completed a repair, to being among the best technicians in the industry. The marketing and insurance billing discussion is designed to help you become more successful in your windshield repair business.
Brent Deines was originally trained by a Novus Methodman in 1987 and is NWRA certified. He has extensive experience repairing windshields and restoring headlights in a variety of climates and conditions. Deines has owned several auto glass repair and replacement businesses in Montana and Oregon and is currently the President and CEO of Delta Kits where he helped develop the company’s headlight restoration program and started the company’s windshield repair training and certification program in 1995.
Korey Gobin, Delta Kits sales manager, is NWRA certified and has been training individuals as well as large groups in the art of professional windshield repair and headlight restoration since 2008. Gobin is actively involved in the Repair of Laminated Automotive Glass Standard and in 2011 was awarded the Mobile Tech Windshield Repair Person of the Year. Korey serves on the ROLAGS committee and has traveled extensively throughout the USA, Canada, and Mexico to promote high-quality standards for windshield repair and headlight restoration. He is affectionately known by his customers as the “Go to Guy” for windshield repair.
Graham Watson, is one of the original Novus Technicians in the UK since 1988 and since then has been running a very successful windscreen repair service in the UK. In 2008 Graham was named Windshield Repair Person of the year at the Mobile Tech Expo, an award he is very proud of as it is voted for by his peers in the trade. For the past 10 years, Watson has been active training technicians for the repair industry and specializes in advanced training for techs with previous experience, during this time he has been lucky enough to work with people from many different countries. His passion for helping others carry out the best quality repairs possible shows in the time he spends offering advice on different trade forums as Screenman.
$206.00
1090 Bailey Hill Rd, Ste A
Eugene, OR 97402
sales@deltakits.com
Reviews
There are no reviews yet.